Most of us have probably seen video clips of the annual Running of the Bulls in Pamplona, Spain, depicting images of high-strung bulls chasing several adventurous, or even crazy, people down a narrow street. The video typically concludes with the bull hooking some unlucky participant in the backside and pitching the individual up in the air like a rag-doll one or more times. Related Articles - Trucking Moves America Forward shares stories of charity - Get ready for winter and help protect against unexpected downtime - FleetPride acquires Berggren Diesel

Although I lack the experience of having a bull ram a horn of any of my lower extremities, I have no trouble at all determining that it would be an unwelcome and painful event. Thus, I will never voluntarily take part in the running of the bulls; I just don’t need the bragging rights. At least I have a choice in the matter. Combination Type Terminal Block

On the other hand, when it comes to inspecting wiring and connectors, I can become the bull. How? By probing, prodding and piercing the connectors and wires.

While it is clearly necessary to check for circuit voltage, open circuits and shorted circuits, there are proper and improper methods to accomplish those tasks. Let’s take a brief look at three improper connector and wire testing methods.

First, simply disconnecting a connector and poking the meter probe into the connector is not advised, as this can spread the connector open to the point of not being able to contact the other connector. Consequently, the test results may be within the specification for the circuit according to the meter; however, the technician just introduced a new problem of an open circuit in the connector.

Another problem with incorrect circuit testing is probing the connector through the connector seals. Circuits often function on very low voltages. The seals built into connectors help to keep out moisture in an effort to avoid corrosion at the connection points.

Such corrosion increases resistance in the circuit which may lead to improper circuit operation and trouble codes. It is a good practice to consult the service information to understand how connections should be disconnected, tested and reconnected.

Lastly, piercing or cutting the wire insulation to test a circuit is never a good idea. Here again, water and other debris can enter in through the exposed wire and cause corrosion and high resistance. Moreover, the exposed wire makes for a potential short to ground point.

Damage to the insulation and related wire damage could necessitate replacing or splicing the wire. When making splices, check the service information for the proper procedure. In some instances, wires may need to be crimped and soldered together to achieve the correct continuity and power flow.

At the end of the day, trying to run with the bulls would not be very helpful for my future wellbeing. That experience is one I will have no problem never entering onto my bucket list. Correctly probing and testing connectors and wires, in contrast, will help make solid professional diagnosis and repairs. That makes for bragging rights worth bragging about.

Convoy, J.B. Hunt Transport and Uber Freight recently announced the formation of the Scheduling Standards Consortium (SSC) which aims to solve transportation scheduling challenges by establishing the freight industry’s first formal set of appointment scheduling application programming interface (API) standards. Complex, pervasive, industry-wide challenges such as this require collaborative, industry-wide solutions; the makeup of the SSC’s founding

Convoy, J.B. Hunt Transport and Uber Freight recently announced the formation of the Scheduling Standards Consortium (SSC) which aims to solve transportation scheduling challenges by establishing the freight industry's first formal set of appointment scheduling application programming interface (API) standards. Complex, pervasive, industry-wide challenges such as this require collaborative, industry-wide solutions; the makeup of the SSC's founding members underscores the need to standardize how information is exchanged around scheduling shipments.

Staying on top of truck maintenance intervals, fleets ensure trucks are in optimal working order and stay on the move. Start 2023 off with valuable service-minded knowledge that can help your fleet to set itself up for success. Related Articles – ECIA GIPC publishes China Tariff avoidance, recovery document – Three ways small fleets can

The ECIA’s Global Industry Practices Committee (GIPC) has published a document to update members on best practices as companies in the electronic components industry respond to the shifting political landscape regarding China tariffs. The China Tariff Avoidance and Recovery Process Update document offers an outline of what the GIPC recommends to members about current practices

Managing a small fleet often means worrying about and managing the safety of several drivers while also managing costs during historic inflation. However, safety shouldn’t take a back seat to costs. According to The U.S. Department of Transportation’s National Highway Traffic Safety Administration, road-related deaths are on the rise in the U.S. In fact, federal

HDA Truck Pride member, Truck Supply Company of South Carolina, recently announced their expansion into the St. Louis market with their purchase of fellow HDA Truck Pride member, Tractor Trailer Supply. Effective immediately, the St. Louis location will take on its new name, Truck Supply Company of Missouri. Truck Supply Company of South Carolina has

The latest from FTR’s State of Freight online press conference.

Here’s where wide-base tire adoption stands with trucking fleets.

Tire manufacturers continue to improve the performance and longevity of wide-base tires.

Small Terminal Block Truck industry content for fleet owners and managers